A novel two‐dimensional CdII coordination polymer: poly[aqua[μ4‐2‐(4‐carboxylatobenzoyl)benzoato]cadmium(II)]

The title Cd^II coordination framework, [Cd(C₁₅H₈O₅)(H₂O)]_n or [Cd(bpdc)(H₂O)]_n [H₂bpdc is 2‐(4‐carboxybenzoyl)benzoic acid], has been prepared and characterized using IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. Each Cd^II centre is six‐coordinated by two O atoms from one 2‐(4‐carboxylatobenzoyl)benzoate (bpdc²⁻) ligand in chelating mode, three O‐donor atoms from three other bpdc²⁻ anions and one O atom from a coordinated water molecule in an octahedral coordination environment. Two crystallographically equivalent Cd^II cations are bridged by one O atom of the 2‐carboxylate group of one bpdc²⁻ ligand and by both O atoms of the 4‐carboxylate group of a second bpdc²⁻ ligand to form a binuclear [(Cd)₂(O)(OCO)] secondary building unit. Adjacent secondary building units are interlinked to form a one‐dimensional [Cd(OCO)₂]_n chain. The bpdc²⁻ ligands link these rod‐shaped chains to give rise to a complex two‐dimensional [Cd(bpdc)]_n framework with a 4,4‐connected binodal net topology of point symbol {4³.6².8}. The compound exhibits a strong fluorescence emission and typical ferroelectric behaviour in the solid state at room temperature.     

有机化学教学中的“三融合、二反思、四进阶”创新教学模式*

为培养出新时代创新人才,构建的“三融合、二反思、四进阶”教学模式有效提升了学生们科技创新能力。依据有机化学特点,创设科学发现情境,通过核心知识点网融合(挑战度)、理论实践交叉融合(高阶性)和化学思政融合(课程思政)“三融合”策略,不断激发学生们学习兴趣;通过教师反思、学生反思的“二反思”过程不断优化教学过程,改善教学效果;最终使具有不同知识层次的学生通过“四进阶”教学策略逐步提升科创能力(创新性)。     

单颗粒光散射显微成像技术在生化医药分析中的应用

等离子体纳米颗粒(PNPs)具有体积小、易表面修饰、生物相容性好、毒性低等优点,在生物传感、生物成像、疾病诊断、肿瘤治疗、材料科学等领域得到了广泛的应用。PNPs的光散射光学性质可以通过调节其大小、组成、形貌和微环境来控制,可用于生化和药物分析。此外,由于单粒子散射显微技术具有高空间分辨率和高灵敏度,借助PNPs具有的独特局域表面等离子体共振(LSPR)特性,可在单颗粒水平进行实时成像。根据PNPs的大小、组成、形态、微环境或耦合变化引起的信号变化,研究人员发展了多种显微成像分析方法,主要分为4种,包括散射光谱的波长位移、单粒子散射强度的变化、高通量RGB分析和计数方法。基于纳米颗粒LSPR散射光谱位移变化的方法准确、灵敏,但需要昂贵的单颗粒散射光谱仪和复杂的操作。基于纳米颗粒散射强度变化的方法简单可行,但易受纳米颗粒粒径和曝光时间等因素的影响。高通量RGB分析方法灵敏度高、成本低,但不适用于颜色变化不明显的单颗粒分析,且重复性差。单粒子计数法灵敏度高,但有时粒子分布不均匀,背景杂质的干扰限制了方法的准确度。因此,这4种定量方法各有优缺点。此外,近年来逐渐发展了一些新的定量方法。例如,研究人员开发了新的时间分辨分析定量方法,并将暗场显微镜与偏振器、滤光片等光学器件相结合以消除背景干扰,以及与电化学、拉曼等仪器相结合以扩大应用范围。此外,为提高分析方法的准确度和灵敏度,暗场显微镜与深度学习、云计算、人工智能等现代计算机科学技术的结合,越来越受到人们的欢迎。基于以上原因,该文重点介绍了单粒子光散射显微镜在生化和药物分析领域的应用,总结了近年来的最新研究进展,讨论了单粒子光散射显微镜在定量分析中的几种主要定量方法,提出了未来的发展趋势,以期为相关研究领域的新人提供一定的学术参考。     

直流电晕充电下环氧树脂表面电位衰减特性的研究

介质材料表面电荷的积累和衰减行为是制约众多高压直流电力设备研制的关键因素. 薄片状介质试样的表面电荷密度与表面电位近似呈线性关系, 因此常通过表面电位衰减行为研究表面电荷的衰减特性. 基于电晕充电、表面电荷沉积和脱陷、介质体内单极性电荷输运等3个物理过程, 建立表面电位动态响应的物理模型. 通过计算环氧树脂的表面电位衰减行为, 得到栅极电压、相对介电常数和体电导率等对其表面电位衰减特性的影响. 栅极电压越高, 表面电位的衰减速度越快; 环氧树脂材料参数典型值(相对介电常数3.93, 体电导率10^-14 S· m^-1)下, 归一化表面电位的衰减速率随时间变化的曲线可拟合为分段幂函数, 其中, 分段幂函数的特征时间、指数系数与栅极电压分别呈幂函数和线性变化关系. 相对介电常数越大, 表面电位的衰减速度越慢; 环氧树脂相对介电常数典型范围(3–4)内, 表面电位衰减时间常数由1720 s增大到2540 s, 两者呈线性关系. 体电导率越大, 表面电位的衰减速度越快; 环氧树脂体电导率典型范围(10^-15–10^-13 S· m^-1)内, 表面电位衰减时间常数由24760 s 减小到260 s, 两者呈幂函数变化关系.     

超薄骨架有序介孔CdS/NiS的制备及光催化产氢性能

采用有序介孔氧化硅为硬模板, 通过纳米浇筑法制备了由螺旋骨架构建的有序介孔硫化镉(CdS)光 催化材料. 该光催化材料具有约5 nm厚的超薄骨架和大的比表面积(238 m²/g), 能有效缩短光催化反应中 光生电荷迁移到表面进行反应的距离并同时提供更多的反应活性位点, 从而增强光催化性能. 通过原位化学沉积法将不同量的助催化剂硫化镍(NiS)沉积到有序介孔CdS表面, 得到了一系列超薄骨架有序介孔CdS/NiS复合光催化材料. 可见光照射下的光催化产氢活性测试结果表明, 负载适量NiS的有序介孔CdS具有显著增强的光催化产氢活性(3.84 mmol?h^-1?g^-1), 约为负载相同量NiS的普通商业化CdS材料(0.22 mmol?h^-1?g^-1)的17.5倍.     

过渡金属电催化剂在硅基光阳极分解水产氧中的作用

光电化学分解水可将太阳能转换为绿色的氢能,为目前的能源危机和环境问题提供了一种理想的解决方案.在分解水反应中,涉及四空穴过程的产氧半反应是制约性能的关键步骤,往往需要在半导体表面沉积电催化剂以加速产氧反应动力学.因此,全面理解电催化剂在光电化学分解水体系中的作用至关重要.在目前的产氧电催化剂中,过渡金属羟基氧化物电催化剂(MOOH,M=Fe,Co,Ni)因其环保、廉价、高效以及稳定的特性,已被广泛用于半导体光阳极分解水器件中.而且,MOOH可用简单的电沉积方法沉积在光电极表面,易于大面积制备.然而,电沉积法制备的MOOH具有复杂的结构,对其作用机制的全面理解更加困难.因此,本文以电沉积MOOH修饰的硅基光阳极(n⁺p-Si/SiO_x/Fe/FeOx/MOOH)作为模型,研究了不同电催化剂对硅光阳极光电化学产氧性能的影响.实验发现电催化剂的界面优化在电催化剂修饰的光电极中发挥着重要作用,这是因为优化的界面可以提升界面电荷传输,提供更多的催化反应活性位点以及更高的本征催化活性,从而更有利于光解水性能的提升.该项研究揭示了电催化剂在光解水器件中的作用,并为今后高效光解水器件的设计提供了一定指导.首先在多晶n⁺p-Si基底上热蒸镀了一层30 nm的金属Fe膜,并通过电化学活化将Fe膜表面转换为FeOx得到Fe/FeOx(记作aFe)界面层,然后利用电沉积方法制备MOOH表面修饰层,最终得到n⁺p-Si/SiO_x/aFe:MOOH光阳极.X射线光电子能谱、拉曼光谱以及扫描电子显微镜表面元素成像的表征结果均证实电极表面由于界面层金属Fe元素的掺杂而形成了Fe1-xNixOOH.在模拟太阳光下用于光解水产氧时,n⁺p-Si/SiO_x/aFe:NiOOH电极的起始电位为~1.01 VRHE(相对于可逆氢电极的电势),在1.23 VRHE下的光电流为38.82 mA cm^-2,显著优于n⁺p-Si/SiO_x/aFe、n⁺p-Si/SiO_x/aFe:FeOOH以及n⁺p-Si/SiO_x/aFe:CoOOH三个对比样品,且其稳定性达到75 h.另外,我们发现n⁺p-Si/SiO_x/aFe:MOOH电极的光电化学产氧性能均显著高于n⁺p-Si/SiO_x/aFe电极,且p++-Si/SiO_x/aFe:MOOH的电催化产氧性能也高于p++-Si/SiO_x/MOOH,不仅证明了aFe界面层对Si与MOOH层之间的界面接触作用的有效调控,而且表明双电催化剂体系(aFe:MOOH)的电催化产氧活性高于单电催化剂(MOOH).热力学分析表明,n⁺p-Si/SiO_x/aFe:MOOH光阳极的光电压大小与其光解水产氧性能并不一致,从而排除了热力学因素对性能的关键影响.进一步从塔菲尔斜率、电化学活性表面积和电化学阻抗谱对各电极的动力学进行了分析,证明了动力学因素在上述光阳极产氧性能中的主导作用.同时发现,由于aFe:NiOOH双电催化剂具有更高的本征电催化产氧性能,提供了更多的表面活性位点以及更有效地促进了光生载流子的传输,对动力学的提升效果更显著,从而使n⁺p-Si/SiO_x/aFe:NiOOH光阳极表现出最高的光解水产氧性能.     

Theoretical Study on Experimentally Detected Sc2S@C84

Sc₂S@C₈₄ has recently been detected but not structurally characterized. 1 Density functional theory calculations on C₈₄ and Sc₂S@C₈₄ show that the favored isomer of Sc₂S@C₈₄ shares the same parent cage as Sc₂C₂@C₈₄, whereas Sc₂S@C₈₄:51383, which violates the isolated‐pentagon rule, is the second lowest energy isomer with the widest HOMO–LUMO gap and shows high kinetic stability. The analysis shows that Sc₂S@C₈₄:51575 is favored when the temperature exceeds 2 800 K and it can transform into the most favorable isomer Sc₂S@C₈₄:51591. Molecular orbital analysis indicates that both Sc₂S and Sc₂C₂ formally transfer four electrons to the cage, and quantum theory of atoms in molecules analysis demonstrates that there is a covalent interaction between Sc₂S and C₈₄:51591. The IR spectra of Sc₂S@C₈₄ are provided to aid future structural identification.     

Effects of Pellet Characteristics on L-Lactic Acid Fermentation by R. oryzae: Pellet Morphology,Diameter, Density,and Interior Structure

The effects of pellet morphology, diameter, density, and interior structure on L-lactic acid fermentation by Rhizopus oryzae were characterized for different inoculum sizes and concentrations of peptone and CaCO₃. Inoculum size was the most important factor determining pellet formation and diameter. The diameter decreased with increasing inoculum size, and larger pellets were observed for lower inoculum sizes. Peptone concentration had the greatest effect on pellet density, which increased with increasing peptone concentration. L-lactic acid production depended heavily on pellet density but not on pellet diameter. Low-density pellets formed easily under conditions of low peptone concentration and often had a relatively hollow structure, with a thin condensed layer surrounding the pellet and an extraordinarily loose biomass or hollow center. As expected, this structure greatly decreased production. The production of L-lactic acid increased until the density reached a certain level (50–60 kg/m³), in which the compact part was distributed homogeneously in the thick outer layer of the pellet and loose in the central layer. Homogeneously structured, denser pellets had limited mass transfer, causing a lower overall turnover rate. However, the interior structure remained nearly constant throughout all fermentation phases for pellets with the same density. CaCO₃ concentration only had a slight influence on pellet diameter and density, probably because it increases spore germination and filamentous hypha extension. This work also provides a new analysis method to quantify the interior structure of pellets, thus giving insight into pellet structure and its relationship with productivity.     

真空离心浓缩/气相色谱-质谱联用法测定白酒中6种邻苯二甲酸酯类增塑剂

建立了测定白酒中6种邻苯二甲酸酯类增塑剂的真空离心浓缩/气相色谱-质谱联用(GC-MS)分析方法。样品经真空离心浓缩,正己烷提取,取上层正己烷,4000r/min离心5min,采用GC-MS测定,外标法定量。在0.10～5.00μg/mL范围内,相关系数r20.992,样品在0.10～2.00 mg/kg范围内加标,平均回收率在88.83%～111.67%之间,相对标准偏差(RSD)为4.85%～11.35%,检出限(LOD)在0.02～0.05 mg/kg之间。采用该方法对16个白酒样品进行测定,结果表明该法简便、快速、结果准确可靠、灵敏度高,能够满足白酒中6种邻苯二甲酸酯增塑剂检测需求。     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.